LeakHunter leveres i en robust flightcase med alt, du skal bruge for at udføre en trykprøve. Med i leveringen er:

• LeakHunter-enheden
• 3 meter flexslange med 2 x Ø160 nipler
• 1 stk. Ø160 muffe til evt. afkast
• 1 stk. endebund med håndtag EB160
• 2 x 5 m luftslanger til at måle opbygget tryk, inkl. 5 stk. røde gennemføringsstykker
• 2 m 230 V-strømkabel (C13)
• Kalibreringscertifikat
• Oprettelse af firma i LeakHunter-databasen
• LeakHunter-gæstelogin til appen – Cruise mode

Aflukningskit (tape, pumpe, afblændingsbolde og ventiler) kan tilkøbes.

Key figures

• Pressure testing to ISO 9972
• Cruise mode for continuous checks during construction
• Capacity: up to approx. 200 l/s at 50 Pa
• Accuracy: flow ±7 % / pressure ±1 Pa
• Weight: 15 kg
• Power: 230 V / 165 W
• App in 5 languages

Preparing the building
The building must be “closed up” before a pressure test can be carried out. All the equipment for this is in our sealing kit, which is available as an add-on. The kit contains:

• 2 x tape 50 mm / 50 m
• 1 x tape 300 mm / 20 m
• 1 x pumpe
• 10 stk. afblændingsbolde
• 5 ventiler

Calibration
LeakHunter is an advanced measuring device that must be calibrated every two years to ensure that the measurements taken are correct. Calibration is a separate service – see Calibration / Servicing of LeakHunter in the shop. During calibration we test the product thoroughly to make sure it measures correctly, and we update the firmware at the same time. You receive a calibration certificate on the web platform.

Subscription
With a subscription, you can document the airtightness of your buildings continuously throughout the construction process. The pressure test report is your proof of the building's airtightness at the time of testing. There are four subscriptions: Free (Cruise mode with live values, no reports), Starter, Pro and Enterprise – see the subscriptions in the shop.
The report is generated as a PDF via our app, which communicates with LeakHunter. You always have access to all your reports in the app and on the web platform, where you can view them and forward them directly by email.
To create a report, you fill in information about the tested building, including:

• Address
• Building floor area
• Checklist (which ensures the test is carried out correctly)